Audi Q3: Adjusting Audi pre sense
Applies to: vehicles with Audi pre sense
You can switch Audi pre sense and the associated systems on or off, or adjust them individually.
The settings depend on the vehicle equipment.
- Applies to MMI: Select on the home screen: VEHICLE > Driver assistance > Audi pre sense.
Setting the prewarning
You can adjust the warning time for the prewarning1) to your preference (Early/Medium/Late) or switch the prewarning off.
Set the warning time for the early warning to Early at first. If you feel that the prewarnings appear too early, then set the warning time to Medium.
The Late warning time should only be set in special circumstances.
1) In certain countries.
Tips
- If Audi pre sense is switched of, it will switch on again automatically once the ignition is switched on again.
- Switch Audi pre sense off when you are not using public streets, when loading the vehicle onto a vehicle carrier, train, ship, or other type of transportation, or when towing the vehicle. This can help to prevent an undesired intervention from the Audi pre sense system.
Messages
Applies to: vehicles with Audi pre sense
If .png)
is displayed when there is a
malfunction,
the Audi pre sense functions may be unavailable
or may be limited.
A message that indicates the cause and possible solution may appear with some displays. The weather conditions may be too poor or a sensor may be covered. Clean the area in front of the sensors and try to turn on the systems again later.
If the malfunction remains, drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
READ NEXT:
Side assist
Description
Applies to: vehicles with side assist
Fig. 110 Driving situations and displays in the exterior mirror
General information
Side assist monitors the blind spot and traffic behind
your vehic
Adjusting side assist
Applies to: vehicles with side assist
You can adjust the side assist to your preferences.
The settings depend on the vehicle equipment.
Applies to: MMI: Select on the home screen:
VEHICLE > Dri
Emergency assist
Description
Applies to: vehicles with emergency assist
General information
Within the limits of the system, emergency assist
can detect inactivity from the driver. In these instances,
the system will
SEE MORE:
Battery Charger -VAS5903- Support Mode
General Information
The support mode provides the vehicle electrical system with
voltage when the Battery -A- is removed or disconnected.
For more information. Refer to the Battery Charger -VAS5903-
Operating Instructions.
The support mode is used for the following situations:
Vehicle ele
Repairing a 0.22 mm 2 Wire with Intermediate
Wire Section
Note
For repairing a 0.222 a repair
wire can be used as the intermediate wire with a cross section
of 0.35-mm2 or 0.5-mm2.
Procedure
- Free up the wire to be repaired at two places approximately
20 cm on both sides of the repair point.
Caution
Risk of damaging the
