Audi Q3: General touch display operation
General information
Applies to: touch display
The center display is a touchscreen. Operation is very similar to operating a
smartphone.
Tips
Certain gestures are not available in every
menu.
Pressing
Applies to: touch display
Fig. 7 Touch display: pressing
Selecting a function or button
- Press the desired function or button.
Pressing and holding
Applies to: touch display
Fig. 8 Touch display: pressing and holding
Accessing options
For some items, you can access additional options
that are not directly visible.
- Press and hold an item until the associated options
are displayed.
Pressing and pulling
Applies to: touch display
Fig. 9 Touch display: pressing and pulling
Moving an item
You can position some items at any location on
the screen.
- Press and hold an item, and then use your finger to pull it to the
desired location.
Pinching fingers together and pulling apart
Applies to: touch display
Fig. 10 Touch display: pinching fingers together and pulling
Zooming in and out on an item
- To increase the size of an item, touch it with
two fingers and pull your fingers apart.
- To decrease the size of an item, touch it with
two fingers and pull your fingers together.
Rotating
Applies to: touch display
Fig. 11 Touch display: rotating
Rotating the view or perspective
- Rotate the item using two fingers.
Dragging
Applies to: touch display
Fig. 12 Touch display: 1 dragging with one finger, 2
dragging with two fingers
Scrolling or browsing through menus/lists
- To scroll through menus and lists, swipe upward
or downward with one finger.
- To browse through menus and lists, swipe to
the right or left with one finger.
Tilting 3D displays
- Drag upward or downward with two fingers.
Dragging away from/toward the edge of the screen
Applies to: touch display
Fig. 13 Touch display: dragging away from the edge of the
screen
Opening hidden menus
The symbol indicates that there
is a hidden
menu.
- Use your finger to drag inward from the upper
or lower edge of the screen, or
- Press the button.
Closing hidden menus
- Press within the menu and drag it toward the
upper or lower edge of the screen.
Information about menu paths
This guide shows you at a glance the paths for
opening a desired menu and its settings and
functions.
Example of a path
- Applies to: MMI: Select on the home screen:
SETTINGS > General > Date & time.
Following the path
- First, determine in which display the path
should be entered. In this example, it is the
MMI display.
- To open the home screen, press
.
- If the SETTINGS button is not displayed, use
your finger to swipe to the left or right until it
appears.
- Press the SETTINGS button.
- If the General button is not displayed, swipe toward
the left or right with one finger until it appears.
- Press the General button.
- If the Date & time button is not displayed,
swipe upward or downward with one finger until
it appears.
- Press the Date & time button.
Tips
If a menu or symbol is in parentheses in the
path, for example, (General) or (),
then it is
an optional menu item that does not need to
be used in every system.
Settings
- Applies to MMI: Select on the home screen:
SETTINGS > Display & brightness > MMI.
Possible settings:
- Brightness
- Touchscreen feedback
READ NEXT:
Traffic safety information
Audi recommends only using certain Infotainment
system functions while the vehicle is stationary,
such as entering a destination or pairing
a mobile device. Always be prepar
Fig. 14 MMI: center display
Description of common symbols
You can operate the default functions using the
symbols that follow. The symbols may be found
in any menu, depending on the context.
Go bac
Fig. 15 Center display: frequently used symbols in the status
bar
The symbols in the status bar show you information at a glance, such as if a
mobile device is connected or if there is a data connec
SEE MORE:
Note
The entire refrigerant charge can be added to either the
high or low pressure side. Refer to
→ Chapter "Refrigerant R134a Capacities, Refrigerant Oil and
Approved Refrigerant Oils".
The work procedure is always to be performed as described in
the operating instructi
Applies to: vehicles with key user management
The vehicle owner must be set as the key user to
use some of the specific Audi connect vehicle
control services that depend on vehicle equipment.
The key user automatically has remote access authorization.
This remote access authorization is
necessary