Audi Q3: Parking and maneuvering
Audi Q3 (F3) 2018-2026 Owner's Manual / Parking and maneuvering
- Introduction
- Parking aid plus
- Rearview camera and peripheral cameras
- Operating the peripheral cameras
- Rear cross-traffic assist
- Assisted parking
- Park assist
- Interrupting the park assist
READ NEXT:
Introduction
Depending on the vehicle equipment, various
parking aids will help you when parking and maneuvering.
Parking aid
The parking aid plus assists you while parking
using audio and visual signals to warn y
Parking aid plus
Activating and deactivating
Applies to: vehicles with parking aid plus
Fig. 111 Center console: parking aid button
General information
The parking aid assists when parking and maneuvering
by providin
Rearview camera and peripheral cameras
Introduction
Applies to: vehicles with rearview camera/peripheral cameras
Fig. 113 Orientation line display when parking
Depending on the vehicle equipment, a rearview
camera or multiple peripheral cSEE MORE:
Molded Foam Part, Removing and Installing, Audi Q3 through MY 2014
Removing
- Remove the front bumper cover. Refer to
→ Chapter "Bumper Cover, Removing and Installing".
- Guide the molded foam piece -2-
at the top out of the bracket -arrow-
and at the bottom out of the holder -1-.
Installing
Install in reverse order of removal. Note the f
Drive Axle Threaded Connection, Loosening and Tightening
Special tools and workshop equipment
required
Socket AF 24 mm -T10361A-
Digital Torque Wrench -VAG1756A-
The wheel bearing must not be under a load while the drive
axle threaded connection on the wheel side is loose.
If the bearings are loaded by the vehicle weight the wheel
bearing
© 2019-2026 Copyright www.auq3.net | 0.0107
