Audi Q3: Smartphone interface
Setup
Applies to: vehicles with smartphone interface
You can connect your smartphone to the MMI
with a cable or wirelessly using the smartphone
interface. Certain content on your smartphone is
adapted in the MMI while driving and can be operated
through the MMI.
Connecting smartphones with a cable
Requirement: the vehicle must be stationary and
the ignition must be switched on. An iPhone from
the 6th generation or newer with lightning connection
must have the latest operating system
installed or a smartphone with Android Auto app.
must have Android 5.0 Lollipop or newer installed.
- Connect your smartphone to the USB port with
charging function using a USB
adapter fig. 139.
Connecting smartphones wirelessly
Applies to: vehicles with wireless Apple CarPlay/wireless Android
Auto
Requirement: the vehicle must be stationary and
the ignition must be switched on. An iPhone from
the 6th generation or newer with lightning connection
must have the latest operating system
installed or a smartphone with Android Auto app
must have Android 11 or newer installed.
- To connect your smartphone wirelessly, switch
on the Bluetooth function and Wi-Fi on your
smartphone.
- Applies to: Apple CarPlay: Open the Apple Car-
Play settings in your iPhone.
- Applies to: Android Auto: Make sure that wireless
Android Auto is allowed in the app settings
in your smartphone.
- Enable the Bluetooth function and visibility on
the MMI.
- Applies to: MMI: Select on the home screen:
SETTINGS > Connected devices > Smartphone
interface > New connection.
- In the MMI, press on your smartphone in the
list of displayed devices.
- To update the list, press .
Establishing a wired/wireless connection
- Follow the system instructions if necessary.
- Pay attention to any additional system prompts
on your smartphone, if applicable.
- Applies to: MMI: If you declined use of Apple
CarPlay or Android Auto the first time you connected
your smartphone, then select on the
home screen: SETTINGS > Connected devices >
Smartphone interface > a smartphone.
- Follow the system instructions.
WARNING
Driving requires your complete and undivided
attention. As the driver, you have complete responsibility
for safety in traffic. Never operate
mobile devices while driving, because this increases
the risk of an accident.
Note
Read the information about Audi connect, and
be sure to note the connectivity costs section.
Tips
- The functions that can be used depend on
the following factors, among others:
- The brand of your smartphone
- The version of the operating system in
your smartphone
- The software version of the app used
- The USB adapter cable and correct connection
- Your cell phone service provider
- The customized settings on your smartphone
- One of the factors above or a combination
of any of them could cause incompatibility
with the smartphone interface. Compatibility
cannot be guaranteed for all types of
smartphones. For more information and assistance,
refer to the user guide and the
manufacturer of your smartphone.
- Please note that in order to use the smartphone
interface, you can only connect your
smartphone via the front USB port with
charging function.
- Wireless Apple CarPlay/wireless Android
Auto is not available in all countries.
- Wireless Apple CarPlay/wireless Android
Auto' is only possible in vehicles without a
navigation system or without a detected vehicle
position (GPS data) if the following requirement
is met: the embedded SIM card
for the vehicle must be logged into the mobile
phone network.
- If the connected smartphone has voice control,
you can operate your smartphone using
the external voice recognition system.
- The MMI uses the menu language selected
in your smartphone settings.
- Some MMI functions are not available when
there is an active smartphone interface connection.
- You cannot connect any mobile devices via
Bluetooth when a smartphone interface
connection is active.
- Usage of the smartphone interface depends
on the availability of services through third
party providers.
- Audi merely provides access to third party
services through the MMI and does not assume
any responsibility for the content of
these services.
Troubleshooting
Applies to: vehicles with smartphone interface
The information that follows lists some troubleshooting
options. They depend on the equipment.
READ NEXT:
Introduction
General settings are described in this chapter.
You can find specific settings in the chapters
about those settings. The available settings depend
on the vehicle equipment.
Date and time
Displayed connected devices
Requirement: the vehicle must be stationary and
the ignition must be switched on.
Applies to: MMI: Select on the home screen:
SETTINGS > Connected devices.
Possible
SEE MORE:
1 - Cover
Overview. Refer to
→ Chapter "Overview - C-Pillar Trim Panel".
2 - Rear Sill Panel Strip
Overview. Refer to
→ Chapter "Overview - Rear Sill Panel Strip".
3 - Lower B-Pillar Trim Panel
Overview. Refer to
→ Chapter
Overview - E-box, Wire Junction, Fuse Panel, Suppressor
1 - Nut
9 Nm
2 - Wiring Harness
3 - Nut
4.5 Nm
4 - Suppressor -C24-
Removing and installing. Refer to
→ Chapter "Suppressor -C24-, Removing and Installing".
5 -