Audi Q3 Owners & Service Manuals

Audi Q3: Opening and closing

READ NEXT:

  Central locking

General information WARNING If you leave the vehicle, switch the ignition off and take the key with you. This applies particularly when children remain in the vehicle. Otherwise, children could s

  Setting the central locking system

You can adjust the central locking system to your preferences. The settings depend on the vehicle equipment. Applies to MMI: Select on the home screen: VEHICLE > Settings & Service > Cent

  Mechanically unlocking and locking the doors

All doors must be unlocked or locked separately if the central locking system fails. Fig. 22 Driver's door: door lock cylinder Fig. 23 Door: mechanically locking Applies to: vehicles with anti-theft

SEE MORE:

  Drive Axle, Removing and Installing, Left Drive Axle with CV Joint, Inserted with Inner Splines

Special tools and workshop equipment required Puller - Driveshaft -T10382- Torque Wrench 1332 40-200Nm -VAG1332- Slide Hammer Set -VW771- Removing - Loosen the drive axle threaded connection on the wheel side. Refer to → Chapter "Drive Axle Threaded Connection, Loosenin

  Steering Gear

Overview - Steering Gear Part 1 1 - Bolt 6 Nm For securing the wire 2 - Bolt Tightening specification: -item 9- Always replace if removed Clean the threaded hole (for example, using a thread tap) before installing the new bolt. 3 - Steering Sh

© 2019-2026 Copyright www.auq3.net | 0.0087