Audi Q3: Wheels
- Wheels and Tires
- Glossary of tire and loading terminology
- New tires or wheels
- Tire wear and damage
- Tire pressure
- Tires and vehicle load limits
- Wheel bolts and rims
- Snow chains
- Uniform tire quality grading
- Tire pressure monitoring system
READ NEXT:
Wheels and Tires
General information
The combination of a rim and tire
will be referred to as a wheel in
this Owner's Manual. If only one
of the components is referred to,
then the term tire or rim will be
used.
Che
Glossary of tire and loading
terminology
Accessory weight
means the combined weight (in
excess of those standard items
which may be replaced) of automatic
transmission, power steering,
power brakes, power windows,
power seats, radio, and
hea
New tires or wheels
Audi recommends having all work
on tires or wheels performed by
an authorized Audi dealer or authorized
Audi Service Facility.
These facilities have the proper
knowledge and are equipped with
the reqSEE MORE:
Rear Brake Caliper, Replacing
Brake Caliper, Replacing, Brakes 1KU
Note
In the following description the brake caliper is removed
and replaced without the brake carrier and pads. The brake hose
is removed.
Should the brake pads also be replaced, the parking brake
must be adjusted back, refer to
→ C
Wheel Bearing Unit, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1332 40-200Nm -VAG1332-
Removing
- Loosen the drive axle threaded connection on the wheel side.
Refer to
→ Chapter "Drive Axle Threaded Connection, Loosening and
Tightening".
- If installed, remove the nut
© 2019-2026 Copyright www.auq3.net | 0.0091
