Audi Q3: Emergency release operation
.png)
Fig. 85 Emergency release at the lower left
.png)
Fig. 86 Emergency release at the upper right
Depending on the version, the emergency release will be located under the shifter boot, either to the lower left or to the upper right.
The procedure differs depending on the version.
Emergency release at the lower left
- Press and hold the yellow release button on the side with a screwdriver.
- Now press the unlock button on the selector lever and move the selector lever to the "N" position.
Emergency release at the upper right
- Insert the screwdriver into the opening of the yellow release lever.
- Using the screwdriver, carefully pull the release lever all the way back and hold it in this position.
- Now press the unlock button on the selector lever and move the selector lever to the "N" position.
Messages
The following messages may appear depending on the vehicle equipment:
.png)
Transmission: malfunction!
Safely stop vehicle
Do not continue driving. Stop the vehicle as soon as possible in a safe location and secure it so it does not roll. See an authorized Audi dealer or authorized Audi Service Facility for assistance.
.png)
Transmission: too hot.
Please stop vehicle
Do not continue driving. Select "P" and contact an authorized Audi dealer or authorized Audi Service Facility for assistance.
.png)
Transmission: too hot.
Please adapt driving
style
The transmission temperature has increased significantly.
Drive very cautiously or take a break from driving until the temperature returns to the normal range and the indicator light turns off.
.png)
Transmission: malfunction!
You can continue
driving. See owner's manual
There is a system malfunction in the transmission.
You may continue driving. Drive to an authorized Audi dealer or authorized Audi Service Facility soon to have the malfunction corrected.
.png)
Transmission: malfunction!
You can continue
driving with limited function. Please contact
Service
There is a system malfunction in the transmission.
The transmission is switching to emergency mode. This mode only shifts into certain gears or may no longer shift at all. The engine may stall.
Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Transmission: malfunction!
You can continue
driving with limited function. No reverse
gear
There is a system malfunction in the transmission.
The transmission is switching to emergency mode. This mode only shifts into certain gears or may no longer shift at all. The engine may stall.
You cannot engage the reverse gear. Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Transmission: malfunction!
You can continue
driving in D until engine is off
There is a system malfunction in the transmission.
The transmission is switching to emergency mode. If you turn the engine off, you will not be able to select any other gears after restarting the engine. Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Danger of rolling away! P
not possible.
Please apply parking brake
- The parking lock was released using the emergency release. Or
- The parking lock can no longer be engaged.
Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected. Secure the vehicle against rolling before exiting the vehicle.
Clutch: malfunction! Please
contact service
There is an ongoing malfunction in the clutch.
The engine torque that can be transferred is reduced.
You may continue driving. Avoid using the clutch in any way that will place a heavy load on it. Do not let the clutch rub for a long time. Drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.
Clutch: temperature too
high. Adapt driving
style
There is a malfunction in the clutch. The engine torque that can be transferred is reduced. You may continue driving. Avoid using the clutch in the future in any way that will place a heavy load on it. Do not let the clutch rub for a long time.
The indicator light turns off once the clutch is fully operable again.
.png)
Clutch: check pedal. You can
continue driving
The clutch is not transferring all of the engine torque. If necessary, remove your foot from the clutch pedal.
READ NEXT:
Drive system
Breaking in
A new vehicle must be broken in within the first
1,000 miles (1,500 km) so that all moving parts
work smoothly together, which helps to increase
the service life of the engine and other dr
Start/Stop system
Applies to: vehicles with Start/Stop system
The Start/Stop system can help increase fuel
economy and reduce CO2 emissions. In Start/
Stop mode, the engine shuts off automatically
when stopped, for exa
Starting and stopping the engine automatically
Applies to: vehicles with Start/Stop system
The system checks if certain conditions are met
before and during the Stop phase, and determines
if the engine stops and how long it remains
stopped. For ex
SEE MORE:
Recirculation Door Motor -V113-, Removing and Installing
Recirculation Door Motor -V113-, Removing and Installing, Manual Climate
Control System (or Heater without A/C System)
Note
The color-coded connecting elements on the actuator for the
identification has been discontinued as a running change as of
10/2013 for those connecting elem
Checking coolant
Fig. 150 Engine compartment - coolant expansion tank (diagram): 1 cover; 2
markings
Observe the safety precautions.
Checking the coolant level
Park the vehicle on a level surface.
Switch the ignition off.
Open the hood.
Check the coolant level in the coolant expansion
tank fig. 146 using th
