Audi Q3 Owners & Service Manuals

Audi Q3: Interior lighting

Front interior lighting

Lights and Vision
Fig. 40 Headliner: interior lighting

Interior lighting buttons

- Interior lighting on/off

- Door contact switch on/off. The interior lighting is controlled automatically.

Touch-sensitive reading lights

  • To turn a reading light on or off, touch the surface 1 briefly.
  • To activate the manual dimming function, touch the surface 1 when the light is switched off and keep touching it until the desired brightness is reached.

Rear interior lighting

Lights and Vision
Fig. 41 Headliner: reading lights

Reading lights

  • To switch the reading lamp on or off, press the button 1.
  • To activate the manual dimming function, touch the surface while the light is switched off 1 and keep touching it until the desired brightness is reached.

Interior lighting

Applies to: vehicles with interior lighting

The ambient lighting turns on when the ignition is switched on. The ambient lighting is deactivated when the light function is OFF.

The following settings depend on the vehicle equipment.

  • Applies to MMI: Select on the home screen: VEHICLE > Light & Visibility > Interior lighting.

Possible settings:

  • Colors
  • Brightness

Display brightness

You can set the instrument and display illumination.

The settings depend on the vehicle equipment.

  • Applies to MMI: select on the home screen: SETTINGS > Display & brightness.

Possible settings:

  • Cockpit dimming
  • MMI
  • Audi virtual cockpit

    READ NEXT:

     Vision

    Adjusting exterior mirrors Fig. 42 Driver's door: knob for the exterior mirrors Turn the knob in the driver's door to the desired position: - Deactivates all adjustment functions. - Selects the le

     Dimming the mirrors

    Manual dimming rearview mirror Pull the lever on the bottom of the mirror back. Automatic dimming rearview mirror The interior and exterior mirrors dim automatically when light shines on them, f

     Windshield wipers

    Switching the windshield wipers on Fig. 44 Lever: windshield wipers Fig. 45 Lever: rear window wiper Move the lever to the corresponding position: 0 - Windshield wipers off 1 - Rain sensor/intermi

    SEE MORE:

     Cooling system

    Coolant The engine cooling system is filled with a mixture of purified water and coolant additive at the factory. This coolant must not be not changed. The coolant level is monitored using the indicator light. However, you should occasionally check the coolant level. Messages The following messag

     Service Connection on Low and High Pressure Side, Removing and Installing

      WARNING Danger due to refrigerant coming out under pressure. Danger of frost bite to skin and other parts of the body. Extract the refrigerant and immediately open the refrigerant circuit after that. If the refrigerant was extracted more than 10 minutes in the past and the re

    © 2019-2025 Copyright www.auq3.net