Audi Q3: Lights and Vision
Audi Q3 (F3) 2018-2025 Owner's Manual / Starting and driving / Lights and Vision
- Exterior lighting
- Turn signal and high beam lever
- High beam assistant
- Adjusting the exterior lighting
- Interior lighting
- Vision
- Dimming the mirrors
- Windshield wipers
- Cleaning/changing wiper blades
- Cleaning/changing the rear wiper blade
- Digital compass
READ NEXT:
Exterior lighting
Switching the lights on and off
Fig. 37 Instrument panel: light button module
Light switch
Press and hold 1 until the desired light function
is selected. The selected function is displayed
briefl
Turn signal and high beam lever
Fig. 38 Operating lever: switching the light functions on
and off
The lever operates the turn signals, the high
beams and the headlight flasher.
Turn signals
The turn signal will activate when you m
High beam assistant
Applies to: vehicles with high beam assistant
The high beam assistant automatically turns the
high beams on or off depending on the surrounding
conditions.
A camera on the rearview mirror mount can d
SEE MORE:
System Overview - Refrigerant Circuit
HD = High-pressure end
ND = Low-pressure end
1 - A/C Compressor Regulator Valve -N280-
To check, refer to Vehicle Diagnostic Tester in the "Guided Fault
Finding" function,
→ Chapter "A/C Compressor Regulator Valve -N280-, Checking Switch-On
Signal" and
→ Wirin
Door Inner Cover, Removing and Installing
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Remove the door trim panel. Refer to
→ Body Interior; Rep. Gr.70; Front Door Panels; Front Door
Panel, Removing and Installing.
- Free up the wiring harness -1-.
- Lift the inn
© 2019-2025 Copyright www.auq3.net
