Audi Q3 Owners & Service Manuals

Audi Q3: Key user

Applies to: vehicles with key user management

The vehicle owner must be set as the key user to use some of the specific Audi connect vehicle control services that depend on vehicle equipment.

The key user automatically has remote access authorization.

This remote access authorization is necessary to control certain functions that depend on the equipment, such as Audi connect vehicle control services, through the myAudi app.

Setting the key user

Requirement: a key user must not be set yet.

  • To seta key user for the vehicle, you will need a myAudi account. Register in the myAudi app or at my.audi.com.
  • Add your vehicle to the myAudi app.
  • Follow the instructions in the myAudi app.

Managing additional users

Depending on the vehicle equipment, you can grant authorization for additional users to use Audi connect vehicle control services at my.audi.com.

Removing the key user

If you remove the key user, all other users that were stored by the key user at my.audi.com and their authorizations will be deleted. It will no longer be possible to use the Audi connect vehicle control services, depending on the vehicle equipment.

Requirement: a key user must be set. The ignition has been switched on with a vehicle key.

  • Applies to: MMI: Select on the home screen: USERS > > Remove key user.

Tips

  • Depending on the country and model there may be an app other than the "myAudi app" available for your vehicle. For additional information, see my.audi.com.
  • You do not need to log into the vehicle with a myAudi user in order to use Audi connect vehicle control services, which depend on the vehicle equipment.
  • If you sell your vehicle, reset all settings to the factory default settings.

    READ NEXT:

     Opening and closing

     Central locking

    General information WARNING If you leave the vehicle, switch the ignition off and take the key with you. This applies particularly when children remain in the vehicle. Otherwise, children could s

     Setting the central locking system

    You can adjust the central locking system to your preferences. The settings depend on the vehicle equipment. Applies to MMI: Select on the home screen: VEHICLE > Settings & Service > Cent

    SEE MORE:

     Adding engine oil

    Fig. 149 Engine compartment: engine oil filling opening cover (example) Observe the safety precautions. Turn the engine off. Open the hood. Unscrew the cap for the engine oil filler opening fig. 149. Carefully add 0.5 quart (0.5 liter) of the correct oil. Check the oil level again after

     Visual Inspection

      WARNING Risk of injury. Follow all warning messages and safety precautions. Refer to → Chapter "Warnings and Safety Precautions". Before any extensive measurements are taken, visually inspect the exterior of the battery, the connections, and the secure installation of the

    © 2019-2024 Copyright www.auq3.net