Audi Q3: Personalization
Audi Q3 (F3) 2018-2025 Owner's Manual / Starting and driving / Personalization
READ NEXT:
General information
Applies to : vehicles with personalized user settings
Depending on vehicle equipment and your country,
your vehicle may be able to manage various
users in the MMI. Each user will be assigned the
setti
User management
Applies to: vehicles with user management
Opening user management
Applies to: MMI
Press USERS on the home screen.
Selecting a user
Applies to: MMI
Press on the desired user.
Enter the 4-digit my
Key user
Applies to: vehicles with key user management
The vehicle owner must be set as the key user to
use some of the specific Audi connect vehicle
control services that depend on vehicle equipment.
The key
SEE MORE:
General Information
Before beginning balancing, the following requirements must
be fulfilled.
Tire inflation pressure must be OK.
The tire tread must not be worn down on one side and should
be at least 4 mm deep.
The tire must not have any flat spots.
It is not possible to balance a flat spot.
The ti
Lane Change Assistance, Calibrating
Special tools and workshop equipment
required
Calibration Tool -VAS6350-
Conditions
- The Lane Change Assistance Control Module -J769-/ Lane
Change Assistance Control Module 2 -J770- must be calibrated
using the Vehicle Diagnostic Tester during the following
conditions:
Lane
© 2019-2025 Copyright www.auq3.net
