Audi Q3: Opening navigation
Applies to: vehicles with navigation system
.png)
Fig. 128 Route guidance not started
The navigation system directs you to your destination, around traffic incidents, and on alternative routes, if desired.
Opening navigation
- Applies to: MMI: Press NAVIGATION on the home screen.
After accessing the navigation for the first time, the map is displayed.
Opening navigation using the multifunction steering wheel
- Select the Navigation tab in the instrument cluster.
- To display navigation when route guidance has
started, select in the instrument cluster: the
.png)
button
> Map.
The following functions are available in the MMI:
- Select destination
.png)
fig.
129. - Intelligent search.
- Switch between the map and the menu:
press
.png)
repeatedly until the
desired function
is displayed.
You can find additional information about the map update at Map operation.
WARNING
- The demands of traffic require your full attention.
Always read the chapter Traffic safety information.
- The route calculated by the navigation system
is a driving recommendation. Follow
the traffic regulations that are applicable in the country where you are
operating the vehicle.
In the event that the driving directions contradict traffic regulations, always follow the traffic regulations applicable in the country where you are operating the vehicle to reduce the risk of an accident.
Note
Read the information about Audi connect, and be sure to note the connectivity costs section in General information.
Tips
- Snow and objects on the GPS antenna or trees and large buildings can impair satellite reception and affect the system's ability to determine the vehicle position. Several deactivated or malfunctioning satellites can interrupt GPS reception.
- Because street names sometimes change, the names stored in the MMI may in rare cases differ from the actual street name.
- Applies to: multifunction steering wheel: Depending on the selected function, operation through the MMI may be required.
- Applies to: vehicles with Audi connect Infotainment: Depending on the country and vehicle equipment, additional services may be available.
READ NEXT:
myAudi navigation
Applies to: vehicles with myAudi navigation
MMI navigation works seamlessly with the myAudi
app.
Your destinations (favorites, last destinations)
are synchronized through your myAudi account.
All im
Entering a destination
Intelligent search for navigation destinations
Applies to: vehicles with navigation system
Using the intelligent search, you can enter the
data for a navigation destination in any order all
at once (f
Select destination
Applies to: vehicles with navigation system
Fig. 129 Menu: select destination
Opening a menu
Applies to: MMI: Press NAVIGATION on the
home screen.
If the map is displayed, press
fig. 128.
T
SEE MORE:
HID Headlamp, Adjusting
Checking and Adjusting Conditions
Tire pressure is OK.
The headlamp lens must be clean and dry.
The headlamp lens may not be damaged.
Headlamp reflectors and bulbs are OK.
Vehicle load must be created.
Vehicle load on driver's seat in otherwise unloaded vehicle
(curb weight).
On
Molded Foam Part, Removing and Installing, Audi Q3 through MY 2014
Removing
- Remove the front bumper cover. Refer to
→ Chapter "Bumper Cover, Removing and Installing".
- Guide the molded foam piece -2-
at the top out of the bracket -arrow-
and at the bottom out of the holder -1-.
Installing
Install in reverse order of removal. Note the f
