Audi Q3: Predictive route guidance
Applies to: vehicles with navigation system and predictive
route guidance
Your MMI can learn the routes that you drive frequently
(such as your daily commute to work and
back) and suggest route guidance based on the
current vehicle position.
When the function is switched on, the MMI records
the routes driven regardless of whether or
not you are using navigation.
Without starting route guidance, your MMI can
check the traffic conditions and shows possible
traffic incidents for the possible routes to be driven.
Opening personal routes
Requirement: predictive route guidance is switched
on. Route guidance must not be
active. A notification is displayed.
Better routes
If there are major traffic incidents, the MMI will
display a notification regardless of the selected
menu. If the MMI has calculated a better route,
you can select it as the route.
- Press on the notification.
As soon as you switch off predictive route guidance,
your personal routes will no longer be recorded.
Routes that were already stored will remain
stored.
Deleting personal routes
- Applies to: MMI: Select on the home screen:
NAVIGATION > > Predictive
route guidance
> Delete recordings from the last 24 hours or
Delete all personal routes and destinations.
Tips
If the predictive route guidance is switched off
and you press , the predictive
route guidance
settings will be displayed.
READ NEXT:
Applies to: vehicles with navigation system
Fig. 134 Alternative routes in the overview map
Opening alternative routes
Requirement: route guidance must be started
and the map must be displayed.
Pre
Favorites
Applies to: vehicles with navigation system
In the favorites, you can call up frequently-used
destinations as well as your home/business address.
Accessing favorites
Applies to: MMI: Selec
Applies to: vehicles with navigation system and satellite map
You can display the navigation map with satellite
images.
Requirement: the MMI must be connected to the
Internet.
Applies to: MMI: Sele
SEE MORE:
Even slight contamination can lead to defects. Therefore
observe the following rules for cleanliness when working on the
A/C system:
Immediately seal the open lines and connections with clean
plugs, for example from the Engine Bung Set -VAS6122-.
Place the components that have been remov
Overview - Stabilizer Bar
1 - Subframe
2 - Bolt
25 Nm + 45º
Always replace if removed
Install evenly
3 - Clamp
4 - Bearing
Always replace the rubber mounts on both sides of vehicle
5 - Stabilizer Bar
Removing and installin