Audi Q3: Air Conditioning
Audi Q3 (8U) 2011-2018 Service Manual / Air Conditioning
- Component Location Overview - A/C System
- Refrigerant Circuit
- A/C Compressor
- Actuators
- Front Heater and A/C Unit
- Air Routing
- Display and Control Head
- Additional Components for Control and Regulation
READ NEXT:
Component Location Overview - Components Outside of Passenger Compartment
Component Location Overview - Components Outside of Passenger Compartment,
Front Component Group "1"
Note
Depending on the engine version to support the engine
coolant pump an After-Run
Component Location Overview - Components Inside Front Passenger
Compartment
Component Location Overview - Components Inside Front Passenger
Compartment, Left Side of Passenger Compartment
1 - Left Footwell Vent
Overview. Refer to
→ Chapter "OvervieSEE MORE:
CV Joint, Servicing, Drive Axle with Triple Roller Joint AAR3300i, Mounted
in Transmission
Special tools and workshop equipment
required
Tripod Joint Tool -T10065-
Puller - Driveshaft -T10382-
Hose Clip Pliers -VAG1275A-
Torque Wrench 1331 5-50Nm -VAG1331-
Torque Wrench 1332 40-200Nm -VAG1332-
Clamping Pliers -VAG1682A-
Press Plate -VW401-
Press Plate -VW402-
Press P
Drive Axle Threaded Connection, Loosening and Tightening
Special tools and workshop equipment
required
Socket AF 24 mm -T10361A-
Digital Torque Wrench -VAG1756A-
The wheel bearing must not be under a load while the
driveshaft threaded connection on the wheel side is loose.
If the bearings are loaded by the vehicle weight the wheel
bearing
© 2019-2026 Copyright www.auq3.net | 0.0107
