Audi Q3: Self-Leveling Suspension
Chassis / Audi Q3 (8U) 2011-2018 Service Manual / Self-Leveling Suspension
READ NEXT:
Electronic Damping
Overview - Electronic Damping Component Location
Note
The body acceleration sensors may not be interchanged with
each other.
1 - Right Front Body Acceleration Sensor -G342-
Level Control System Sensor
Overview - Front Level Control System Sensor
Note
A replacement Left Front Level Control System Sensor -G78- and Right
Front Level Control Sensor -G289- only comes complete with the couplSEE MORE:
Drive Axle Threaded Connection, Loosening and Tightening
Special tools and workshop equipment
required
Socket AF 24 mm -T10361A-
Digital Torque Wrench -VAG1756A-
The wheel bearing must not be under a load while the drive
axle threaded connection on the wheel side is loose.
If the bearings are loaded by the vehicle weight the wheel
bearing
Outer CV Joint, Checking
It is necessary to disassemble the joint whenever replacing
the grease or if the ball surfaces show wear or damage.
Removing
- Before disassembling mark ball hub position in relation to
the ball cage and housing with an electric scriber or oil stone
-arrow-.
- Tilt ball hub and bal
© 2019-2026 Copyright www.auq3.net | 0.0114
